Exploring the stemflow dynamics and driving factors at both inter- and intra-event scales in a typical subtropical deciduous forest

Numerous efforts have been made to understand stemflow dynamics under different types of vegetation at the inter-event scale, but few studies have explored the stemflow characteristics and corresponding influencing factors at the intra-event scale. An in-depth investigation of the inter- and intra-event dynamics of stemflow is important for understanding the ecohydrological processes in forest ecosystems. In this study, stemflow volume (F_V), stemflow funnelling ratio (F_R), and stemflow ratio (F_%) from Quercus acutissima and Broussonetia papyrifera trees were measured at both inter- and intra-event scales in a subtropical deciduous forest, and the driving factors, including tree species and meteorological factors were further explored. Specifically, the F_V, F_R and F_% of Q. acutissima (52.3 L, 47.2, 9.6%) were lower than those of B. papyrifera (85.1 L, 91.2, 12.4%). The effect of tree species on F_V and F_% was more obvious under low intensity rainfall types. At the inter-event scale, F_V had a strong positive linear correlation with rainfall amount (G_P) and event duration (D_E) for both tree species, whereas F_R and F_% had a positive logarithmic correlation with G_P and D_E only under high-intensity, short-duration rainfall type. F_R and F_% were mainly affected by wind speed and the maximum 30-min rainfall intensity under low-intensity, long-duration rainfall type. At the intra-event scale, for both tree species, the mean lag time between the start of rainfall and stemflow was the shortest under high-intensity, short-duration rainfall type, while the mean duration and amount of stemflow after rain cessation were the greatest under high-amount, long-duration rainfall type. The relationship between stemflow intensity and rainfall intensity at the 5-min interval scale also depended greatly on rainfall type. These findings can help clarify stemflow dynamics and driving factors at both inter- and intra-event scales, and also provide abundant data and parameters for ecohydrological simulations in subtropical forests.     

Regional soil organic carbon prediction model based on a discrete wavelet analysis of hyperspectral satellite data

Most studies have the achieved rapid and accurate determination of soil organic carbon (SOC) using laboratory spectroscopy; however, it remains difficult to map the spatial distribution of SOC. To predict and map SOC at a regional scale, we obtained fourteen hyperspectral images from the Gaofen-5 (GF-5) satellite and decomposed and reconstructed the original reflectance (OR) and the first derivative reflectance (FDR) using discrete wavelet transform (DWT) at different scales. At these different scales, as inputs, we selected the 3 optimal bands with the highest weight coefficient using principal component analysis and chose the normalized difference index (NDI), ratio index (RI) and difference index (DI) with the strongest correlation with the SOC content using a contour map method. These inputs were then used to build regional-scale SOC prediction models using random forest (RF), support vector machine (SVM) and back-propagation neural network (BPNN) algorithms. The results indicated that: 1) at a low decomposition scale, DWT can effectively eliminate the noise in satellite hyperspectral data, and the FDR combined with DWT can improve the SOC prediction accuracy significantly; 2) the method of selecting inputs using principal component analysis and a contour map can eliminate the redundancy of hyperspectral data while retaining the physical meaning of the inputs. For the model with the highest prediction accuracy, the inputs were all derived from the wavelength range of SOC variations; 3) the differences in prediction accuracy among the different prediction models are small; and 4) the SOC prediction accuracy using hyperspectral satellite data is greatly improved compared with that of previous SOC prediction studies using multispectral satellite data. This study provides a highly robust and accurate method for predicting and mapping regional SOC contents.     

一种移动视频与地理场景的融合方法

快速准确地了解灾害现场状况是救灾过程中的重中之重。通常发生灾害都会使用无人机进行现场勘察，但是无人机视频难以与实际的地理场景关联起来，为此本文提出了一种移动视频与地理场景的融合方法。该方法首先采用具有仿射不变性的ASIFT算法检测特征点，将匹配后的特征点采用RANSAC算法进行迭代剔除噪点，计算视频与地理场景最优的透视变换矩阵模型参数；然后将计算得到的透视变换参数应用到视频数据，恢复视频角点坐标；最后通过内插得出所有视频帧的角点坐标，实现视频与DOM的精确融合。试验结果表明，对视频数据匹配的间隔帧越短，其整体融合精度越高，通过本文方法进行视频与地理场景融合的误差标准差低于10 m。     

BDS卫星钟差半参数平差模型异常数据探测与处理

针对北斗卫星钟差数据中出现钟跳、粗差等异常数据频次较高的问题,将半参数平差模型引入BDS的钟差数据的处理过程中。首先,在考虑系统误差的同时,改进了常用的钟差模型;其次,综合考虑异常数据和系统误差,利用补偿最小二乘原理和极值求解方法,详细推导了分离异常数据前后参数和非参数估计值与相应观测值改正数的关系表达式,实现了异常数据的定值、参数求解和系统误差分离。在此基础上,引入Cook距离,给出了利用参数分量和非参数分量的Cook距离及混合Cook距离,去判断异常值的位置,并给出了一些参数的选取方法及相应的处理措施,实现了卫星钟差异常数据的定位和定值以及部分系统误差的分离。最后,采用武汉大学GNSS中心提供的采样间隔为5 min的北斗卫星精密钟差数据,将本文方法与常用方法进行了试验对比。试验结果表明,本文方法能够有效地识别并处理卫星钟差数据中的异常值,有效克服了基于经验阈值钟差异常数据探测方法的不足,且该方法对于量级较小的异常钟差数据也有很好的探测效果,一定程度丰富了现有的BDS钟差数据质量控制方法。     

融合多源数据的三维建模方法及精度分析

以地面相机影像、低空无人机影像和地面三维激光点云数据为融合对象,研究空地影像融合、低空影像融合地面三维激光点云和低空影像融合三维白模进行三维建模的方法,并对其三维建模精度和建模效果进行综合分析。这3种融合方法进行三维建模丰富了三维模型的色彩纹理信息,提高了三维模型的几何结构精度,能满足较大场景的三维实景模型的建模要求,为数字化古建筑(古文物)保护提供具有较高价值的参考数据。     

科尔沁湿草甸参考作物蒸散发模拟分析

为探明气候变化下干旱半干旱地区湿草甸参考作物蒸散发(ET₀)影响因子,使用FAO 56 P-M模型对科尔沁湿草甸ET₀进行模拟,利用涡度相关系统对模型的适用性进行评价,并通过通径分析及指标敏感性分析对ET₀的影响因子进行辨识。结果表明:(1)小时尺度模拟精度最高,日尺度次之,月尺度较差,小时尺度上晴、阴、雨3种天气条件下模拟效果不同,晴天最优,阴雨天较差。(2)ET₀年内变化呈单峰曲线状,生长季明显高于非生长季,集中在3—10月,占全年89.79%。生长季典型晴天ET₀逐小时分布特征遵循倒“U”单峰型变化规律。(3)通径分析结果显示,对ET₀的通径系数以及对回归方程估测可靠程度E的总贡献均表现为VPD(饱和水汽压差) > T_min(最低气温) > R_n(冠层表面净辐射)>u₂(2 m高度风速),即VPD为影响ET₀最重要的因子;指标敏感性分析中,在去除VPD后引起的E变化最大,说明ET₀对VPD的变化最为敏感,其次为u₂、T_min和R_n。     

Research on Parallel Algorithms for uv-faceting Imaging

The uv-faceting imaging is one of the widely used large field of view imaging technologies, and will be adopted for the data processing of the low-frequency array in the first stage of the Square Kilometre Array (SKA1). Due to the scale of the raw data of SKA1 is unprecedentedly large, the efficiency of data processing directly using the original uv-faceting imaging will be very low. Therefore, a uv-faceting imaging algorithm based on the MPI (Message Passing Interface)+OpenMP (Open Multi-Processing) and a uv-faceting imaging algorithm based on the MPI+CUDA (Compute Unified Device Architecture) are proposed. The most time-consuming data reading and gridding in the algorithm are optimized in parallel. The verification results show that the results of the proposed two algorithms are basically consistent with that obtained by the current mainstream data processing software CASA (Common Astronomy Software Applications), which indicates that the proposed two algorithms are basically correct. Further analysis of the accuracy and total running time shows that the MPI+CUDA method is better than the MPI+OpenMP method in both the correctness rate and running speed. The performance test results show that the proposed algorithms are effective and have certain extensibility.     

利用GLAS激光测高数据评估DSM产品质量及精度优化

提出了一种利用卫星激光测高数据直接优化提升数字表面模型（DSM）产品精度的方法。选取境外中亚地区的资源三号DSM开展试验，通过采用多准则约束方法提取激光高程控制点，分别利用偏度、中值、线性、二次多项式等进行DSM误差修正，发现4种模型均能有效消除DSM系统误差，其中基于二次多项式的方法更适用于平地和丘陵地貌，线性模型更适用于高山地貌。试验验证了采用卫星激光测高数据优化境外DSM技术流程的可行性，最终可提高DSM的绝对高程精度。     

Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.     

基于散射计风场数据的台风强度诊断方法——以海洋二号卫星数据为例

本文提出了一种基于散射计风场数据的台风定强方法。该方法定义了台风所在海区的一个圆形区域上的风速平均值来对台风进行定强，并使用海洋二号卫星散射计历史数据对该方法进行了验证。验证结果表明，该台风定强方法可以克服散射计反演台风风速过低的问题。与台风强度监测的历史记录比较的结果显示，在台风强度低于"强台风"这一强度等级时，该方法能够有效估算台风强度。